The softness of human body silicone is generally between 0 10 degrees. The softness of silicone is very good, the softness can even reach 0 degrees less.

For mask manufacturers, 5 degrees, 10 degrees 15 degrees are more often used, compared to 0 degrees for doll manufacturers. For the types of skin products, 0 degrees 5 degrees is more.

How to use: Mix the two components A B at a weight ratio of 1:1, then pour after vacuum degassing. Room temperature (25 degrees) 30 minutes operation time, 3-4 hours to fully cure; under the premise of a vacuum machine, you can consider heating 60-120 degrees, it can be fully cured within a few minutes;

Note: Liquid human body silicone should be sealed stored. The mixed human body silicone should be used up within the specified time to avoid waste due to curing of the rubber; ·Avoid rubber nitrogen (N), phosphorus (P), sulfur (S) Contact with tin (Sn), lead (Pb), mercury (Hg), alcohols, water, etc., such as organotin compounds silicone rubber containing organic tin, sulfur, sulfide, sulfur-containing rubber, ammonia-based compounds, ammonia Do touch the container mold with the condensed rubber. Otherwise, the addition-molded liquid silicone rubber will have sticky surface, incomplete curing even uncured phenomena; ·Operate with those that have used condensed silicone rubber. Separate the containers. Use unused room temperature silicone tools to operate this silicone to avoid uncuring sticky surface, signs of incomplete curing even uncuring. At the same time, avoid sludge, various types of clay, putty, solder s contact.