Imitating human body silicone, even though I have been researching this aspect for a long time, I have rarely seen it. The reason is that the performance requirements of human body-simulating silicone are higher than those of general mold silicone pad printing glue. It needs special adjustment. , So the output is relatively small; the most important thing is that there is less demand customers, which is also the main factor that rarely appears in the line of sight of the editor.

What is the performance of human-like silicone what is its service life?

Human body silicone rubber manufacturers are a kind of addition molding silicone. It is a low-viscosity 1:1 series of AB silicone. The overall hardness is relatively low, generally around 0 to 15 degrees. If the hardness is too high, it will be out of imitation. The category of human body silicone. It is used to make artificial human masks, headgears, artificial human models adult products. The mixed viscosity is about 1000-3000cps. The operation method is manual operation, which is similar to the operation method of ordinary mold silicone.

As for its service life, it can be divided into liquid life cured life.

Human body-like silica gel comes a special process, which can withstand high temperature, aging, acid alkali. The uncured human body-like silicone will never be cured without mixing the two components, will always be in a liquid state. It’s just that as time goes on, the water inside the liquid silica gel gradually evaporates, the remaining silica gel components will precipitate, the overall viscosity of the silica gel will thicken. At this time, just add a little silicone oil to quickly stir it it will become very thin. Can be operated again. Generally, the existence conditions of the addition-molded liquid silicone human body-like silicone need to be in a cool place, avoid direct sunlight. Generally, the longest shelf life is about 12 months.

The shelf life of human-like silicone in liquid form is one year, what about after curing?

In fact, the cured silicone products can be placed for 5-10 years without any changes in normal use maintenance. Although it can withstand high temperatures, it is most afraid of using it at high temperatures. If the cured human-like silicone is baked at a high temperature for a long time, the color will turn yellow, the hardness will become harder, the performance will deteriorate. The internal molecular structure of the silicone will be destroyed the performance will decrease. The use value may be very short.