Introduction of adult products silicone:

Adult products silica gel is a two-component addition molding silica gel, environmentally friendly non-toxic, has passed the EU FDA, SGS, MSDS food-grade product environmental non-toxic certification. It is an environmentally friendly new material specially developed for sex toys, which can be used to produce adult simulation sex toys such as silicone penis, silicone lower body silicone dolls, silicone breasts, etc.

Silicone for adult products:

Human sex products silicone can be used to produce sex toys for adult sex products, silicone penis, silicone lower body, silicone dolls, silicone breasts, silicone artificial humans. At the same time, it can also be used to produce highly simulated mannequin shapes, silicone prostheses, such as silicone hands, silicone fakes, silicone simulated organs, silicone masks other flexible silicone rubber products.

Features of adult products silicone:

1. Non-toxic, tasteless, safe environmentally friendly, with good skin-friendly effect;

2. High degree of simulation, good simulation effect, easy to operate, no bubbles;

3. The products made are deformed, soft smooth, do leak oil, have good resilience;

4. It can be cured at room temperature heated;

5. Our company can adjust product performance according to customer requirements.

Adult products silicone operation:

1. Mix the AB components of silica gel at a weight ratio of 1:1 stir evenly;

2. Put the mixed stirred rubber material into a vacuum machine to vacuum remove bubbles. The product will be smoother bubble-free (if there is no vacuum machine, the curing time can be prolonged to make the silica gel bubble naturally, but This effect is very satisfactory);

3. Spray (paint) the mold frame that have been made with release agent, place the mold in the middle, then brush the vacuumed human body glue onto the human body model to be copied. Paste one layer of gauze at a time repeat several times;

4. After the silicone is cured at room temperature heated cured, the mold can be demolded. After the silicone mold is taken out, the edges are treated with burrs. Generally, after demolding, the silicone mold will have better effect after being placed for 24 hours!

Note on the operation of adult products silicone:

1. The human body silicone is an addition-molded silicone. When using it, do contact with any other condensation type silicone, otherwise it will cause the silicone to appear "poisoned" cause the silicone to cure;

2. The product should be in contact with water, impurities, organotin catalysts, acids, alkalis other organic compounds containing nitrogen, phosphorus, sulfur, otherwise it will affect the curing of silica gel, these substances should be mixed during use;

3. Smoking is prohibited during the operation to prevent "poisoning" of silica gel;

4. The proportion of human body silica gel must be in the correct proportion of 1:1, must be mixed stirred evenly when stirring.

Adult products silicone parameters:

Note: The above parameters are only regular parameters. If you have special requirements, please contact our company; the hardness, viscosity, operating time after curing can be specially adjusted provided according to customer needs.