Introduction to Silicone Gel:

Silicone gel is a kind of addition-molded silica gel. It is a kind of ultra-soft silica gel with hardness is environmentally friendly, non-toxic odorless. It is a kind of addition-molded silicone rubber with more more applications. Because it is as soft as jelly after curing, it is also called jelly glue.

Silicone gel application:

Silicone gel can be used to make silicone breast pads, silicone breast stickers, other silicone artificial products. It can also be used for silicone foot stickers, silicone foot stickers, insoles, cushions, etc., to massage the human body, cushion the soles, protect the buttocks. , Is a material for protective equipment human health care equipment with excellent cushioning effect.

Silicone gel can also be used as potting silica gel, such as the potting of grooves for high-efficiency air filters.

Features of silicone gel:

1. Food-grade silicone has FDA certification, is environmentally friendly non-toxic. It is a new type of healthy high-tech silicone;

2. The touch is soft comfortable, it is a good material for human body silicone products;

3. Strong adhesion, the viscosity can be adjusted according to customer requirements;

4. The hardness, viscosity, time color can be adjusted to produce silicone gel tailored for you.

Instructions for use of silicone gel:

1. The correct ratio of silica gel curing agent is 1:1;

2. Mix stir the AB components evenly. Stir evenly at the bottom walls of the container. If it is evenly stirred, the phenomenon of incomplete curing of the silicone may occur in the later stage;

3. Put the stirred rubber material into a vacuum box for deaeration. The size of the vacuum the time of vacuuming are determined according to the viscosity of the rubber the product surface. The deaeration time is generally 2-4 minutes; (if there is no vacuum machine, it can be Extend the curing time carry out natural defoaming, but the defoaming effect is very ideal)

4. Slowly pour the rubber material along the shell, make it flow to the bottom, let the rubber liquid level rise slowly, try to avoid covering the air inside;

5. After the rubber is injected, wait for it to solidify.

The ratio of silicone gel is 1:1, which is suitable for manual operation mechanical operation. Compared with the use of a silicone injection machine, the AB component is directly extruded poured through the AB tube, which only ensures the even ratio of the AB component, but also It can also stir evenly through pressure to obtain better product performance. The required viscosity can be adjusted according to the requirements of the silicone injection machine.