Brief introduction of high efficiency filter liquid tank glue:

High efficiency filter fluid tank glue is a kind of viscous, gel-like two-component addition molding fluid tank sealant for short, specially used in high efficiency air filters. It can be cured at room temperature  heated.

Application of high efficiency filter tank glue:

High-efficiency filter liquid tank glue is mainly used for the sealing of liquid tank-type high-efficiency air filters, electronic appliances  components,  plays a protective role in sealing, moisture-proof, shock-proof  insulation. It can be applied to the surface of PC, pp, ABC, PVC  other materials  metal, which has the effect of sealing  preventing moisture.

Characteristics of high efficiency filter tank glue:

1. Low viscosity, good perfusion, good viscosity, good softness;

2. Good sealing, no oil after curing,  no by-products in the curing reaction;

3. It has a good sealing effect in the range of -60-200 degrees;

4. There are no restrictions on temperature when installing filters  moving filters;

5. Product performance is adjustable.

High efficiency filter liquid tank glue operation:

1. The correct ratio of silica gel  curing agent is 1:1;

2. Mix  stir the AB components evenly. Stir evenly at the bottom  walls of the container. If it is  evenly stirred, the phenomenon of incomplete curing of the silicone may occur in the later stage;

3. Put the stirred rubber material into a vacuum box for deaeration. The size of the vacuum  the time of vacuuming are determined according to the viscosity of the rubber  the product surface. The deaeration time is generally 2-4 minutes; (if there is no vacuum machine, it can be Extend the curing time  carry out natural defoaming, but the defoaming effect is  very ideal)

4. Slowly pour the rubber material along the shell, make it flow to the bottom, let the rubber liquid level rise slowly, try to avoid covering the air inside;

5. After the rubber is injected, wait for it to solidify.

HEPA filter tank glue operation attention:

1. The product to be filled needs to be kept clean  clean;

2. Please check the A agent before use, observe whether there is precipitation,  fully stir the A agent evenly;

3. Weigh according to the correct ratio, pay attention to the weight ratio  the volume ratio;

4. Please infuse the mixed rubber in time, try to use up the rubber with a good ratio within the operable time;

5. Keep the environment clean during the curing process to avoid dust  impurities falling into the uncured rubber;

6. After pouring, the rubber material will gradually penetrate into the gap of the product, please do a second potting if necessary;

7. There are a few people who may come into contact with glue  cause mild skin allergies. It is recommended to wear protective gloves during operation. If it accidentally touches the skin, please wipe it with acetone  alcohol,  clean it with clean water;

8. Please try a small amount before using it in large quantities to master the product using skills to avoid errors.