Liquid silicone is an environmentally friendly, non-toxic harmless silicone material, also known as addition molded silicone food-grade silicone. Because of this, it has been loved by many customers. Liquid silicone has gradually replaced traditional plastic products; because some customers I just started to come into contact with liquid silicone, I don’t know much about the use of liquid silicone materials, which leads to some phenomena such as non-curing sticky after curing during the use of liquid silicone. Today, the Hongtu editor summarizes some common liquid silicone problems. Please refer to it.

1. When the liquid silicone comes into contact with unenvironmentally friendly substances containing sulfur, tin, lead amine other materials, it will be poisoned solidified, the liquid silicone will form a pile of piles, the surface will become sticky after curing, It can't be cured completely, which causes production waste.

2. The AB component must be fully stirred evenly during use. If it is stirred evenly, the glue will be cured the curing will be incomplete, similar to sticky hands.

3. The AB component is added according to the proportion. If the A component the B component is added more less, it will also cause the liquid silicone to cure incompletely.

Regarding the incomplete curing of liquid silicone, the main common ones are the above points. There are still many liquid silicones that need to be explored slowly during production. If you have any questions, please call for consultation.