Many ceramic tableware have patterns trademarks, some of which are manually painted printed. Pad printing is one of the printing processes. Pad printing silica gel is the raw material used to make pad printing rubber heads is an indispensable part of ceramic pad printing. This case introduces the process diagram of the pad printing process of the ceramic bowl made by the Foshan ceramic tableware manufacturer using our ceramic pad printing silica gel installed on the machine.

Pad printing silicone rubber head is installed on the pad printing machine for pad printing operation

The pad printing rubber head prints clear patterns on ceramics at night

      When using ceramic pad printing silica gel to make a pad printing rubber head, it is necessary to make the rubber head according to the pattern size ratio. The size of the rubber head the pattern size ratio is 3:1, the hardness of the pad printing rubber head needs to be based on the oiling falling oil pattern products The position is adjusted. If the hardness of the pad printing rubber head is too large, it will lead to poor oiling oil removal, resulting in unclear printing patterns; if the pad printing head hardness is too soft, the pad printing rubber head will be easily deformed. Therefore, when operating the pad printing silica gel to make the rubber head, it is necessary to add silicone oil to control the proportion. Silicone oil is one of the methods to control the softness hardness of the rubber head, but it cannot be excessively added.